PHLster Enigma Instructions
- Nov 4th 2024
- By
Which PHLster Enigma model do you have?
Choose your PHLster Enigma model to find instructions for how to assemble it and how to adjust it. You can also find helpful info about how to wear your Enigma, how to adjust the leg leash, leg leash alternatives, how to get comfortable with it, how to install optional accessories, tips and tricks for success, troubleshooting, and much more.
Look at the shape of your Enigma faceplate to determine which Enigma model you have, or check your receipt.
Enigma Express
The Enigma Express is pre-assmbled and comes with our Skeleton holster (for specific gun models only – see fit list).
The Express faceplate has one big oval hole in the middle, and attaches to the holster with two screws. It’s made for a limited list of guns WITHOUT a light or laser attached. See the Express product page for specific fit information.
Enigma Express Fit List
PHLster Enigma Express Gun Fit List
- Beretta Cheetah 80x
- FN Reflex
- G19/G26**
- G42**
- G43/43x/G43x MOS**
- G48/G48 MOS**
- HK VP9
- SigP320c**
- Sig P365/P365X**
- P365XL**
- P365-XMacro** (P365 Macro and Macro Variants are only compatible with the Macro Express)
- Sig Fuse
- P365-380**
- Springfield Hellcat
- Hellcat Pro
- Ruger LCR
- S&W J-Frame (Does not fit the S&W Bodyguard 38)
- Shield 1.0/2.0 – 3.1in
- Shield Plus - 3.1in
- Shield Plus – 4in/3.1in
- M&P 2.0 Compact 4in
- Taurus 856
- Taurus 856 T.O.R.O.
- Taurus GX4
- Taurus GX4 Carry
- Walther PDP-F 3.5in
** NOTICE: Sig models with either factory or aftermarket metal frames are not compatible with the Enigma Express. Additionally, “Glock analog” pistols like P80 and Shadow Systems are not compatible with the Enigma Express.
Enigma OS Standard
The Standard Enigma OS comes disassembled and does not come with a holster shell. It is for guns without a light or laser attached.
The Standard faceplate has two large rectangular holes in the middle, and 6 small holes on each side. It attaches to the holster through the modwing, using two screws. It’s for guns WITHOUT a light or laser attached.
Holster Compatibility Guide
Standard Enigma OS
The Standard Enigma OS is compatible with a wide variety of holsters from other manufacturers. To find a compatible holster for your gun, use the Standard Enigma OS FIT GUIDE.
Enigma Express Light Bearing
The Light Bearing Enigma Express is pre-assmbled and comes with our Floodlight2 holster.
The Light Bearing Express has one large, irregular hole in the faceplate, and the holster attaches with four screws. It’s made for guns with either an X300 or TLR-1 weapon-mounted light.
Enigma OS Light Bearing
The Light Bearing Enigma OS comes disassembled and does not include a holster shell. It is for guns that have a light or laser attached.
The Light Bearing Enigma has two long, parallel slots in the faceplate. It attaches to the faceplate with four screws. It’s for guns with weapon mounted lights or lasers, as well as Tenicor brand holsters.
Holster Compatibility Guide
Light Bearing Enigma OS
The Light Bearing Enigma OS is compatible with a wide variety of holsters from other manufacturers. To find a compatible holster for your gun, use the Light Bearing Enigma OS FIT GUIDE.