The Enigma upgrade kit includes new parts to upgrade your Existing Enigma. You do NOT have to use all of the new parts if you don't want to. If the hardware on your current Enigma is good, you can reuse it and keep the new hardware as spares. However, if you're missing pieces, or if your existing pieces show wear, we recommend using the new components from the kit to refresh and restore.
NOTE: Your kit comes with eMod inserts. These replace the rectangular inserts that come with most belt holsters, and help the Enigma faceplate lay flatter. Scroll down to see the video on how to assemble them on your Modwing.
SAFETY WARNING: The Standard Enigma Express Upgrade Kit is only compatible with holsters which meet ALL the requirements in the OS Fit Guide. Using the wrong holster on your Enigma faceplate can lead to failure, severe injury or death. It will also void your lifetime warranty. If you have questions about compatibility, contact us before proceeding.
DO NOT use the Standard Enigma OS if your gun has a light or laser - not even a small one.
To assemble the Upgrade Kit for your Standard Enigma OS, you will need:
- Phillips screwdriver
- Big rubber band
- Optionally, you can also use a power driver or a rubber block
To Assemble, Use the Instructions Page
To assemble your Upgrade Kit, visit the OS instructions page. On that page, choose whether your holster has fixed or adjustable retention. Remove the faceplate from your existing holster, then follow the assembly steps to add the new faceplate from the Upgrade Kit.
NOTE: Your upgrade kit comes with eMod inserts. These replace regular Modwing inserts to help the faceplate lay more flat against the wing. Watch the video below to learn how to install eMod spacers on your wing.
And of course, please contact us if you need assistance!